| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Type: | Rolling Machine |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Specifications | Unit | W11S-12x3000 |
| Machine type | / | Upper roller universal |
| Pressure | T | 120 |
| Maximum width | mm | 3000 |
| Roller working length | mm | 3050 |
| Pre-bend | mm | T10*B3000*min600(σs≤245Mpa) |
| Full load minimum diameter | mm | T12*B3000*min600(σs≤245Mpa) |
| Full load remaining straight edge length | mm | ≤2.5 times the plate thickness |
| Upper roll diameter | mm | 300 |
| Bottom roll diameter | mm | 165 |
| Center distance between two bottom rollers | mm | 270 |
| Rolling speed | m/min | About 4 |
| Pressing speed of upper roller | mm/min | About 120 |
| Number of rollers | / | 4 |
| Number of idlers | / | 1 |
| Main motor power | KW | 11 |
| Max. plate thickness | mm | 6 |
| Hydraulic motor power | KW | 5.5 |
| Mobile motor power | KW | 2.2 |
This machine is a hydraulic three-roller plate rolling machine, which is used to complete the pre-bending, rounding, and rounding of plate ends without turning around after feeding carbon steel and low alloy steel for various containers at room temperature. At the same time, it can roll arc-shaped workpieces. The upper roller can move vertically and horizontally. Pre-bending is achieved by moving the upper roll horizontally so that the upper roll is in an asymmetrical position relative to the lower roll. When rounding, the two lower rollers are driven by the motor and the reducer. Since the elevation of the lower roller remains unchanged, it is convenient for feeding and operation.
The main structure of the equipment is composed of upper roller devices, lower roller and horizontal moving devices, idler roller devices, main transmission devices, tipping devices, left and right side frames, chassis and balance devices, etc.
){kind=link}